Model
Chassis Code |
Grade |
Drive System
Displacement |
Conformity |
EDFC
Conformity |
Kit Part No.
MSRP |
Set Spring |
Ride Height
Drop
|
Recommended
Ride Height
Adjustment Range |
Ride Height
Adjustable Range |
Note |
| Ft |
Rr |
CR-Z
ZF1
2010.02+
| α, β |
FWD
1500 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-10120 |
| Strut | - |
|
w/ Spring
GSHA6-F1AS2
¥198,000 (MSRP)
¥207,900 (incl TAX) |
φ70
5.0 k 200mm |
Exclusive Spring
5.0 k |
Ft:-40
Rr:-40 |
Ft:-50 to -30
Rr:-50 to -30 |
Ft:-64 to 0
Rr:-59 to -29 |
Includes H.A.S. Kit w/o Upper Mount. [Upon EDFC installation] Front: Motor and harness need to be waterproofed with silicon sealant. |
NSX
NA1
1990.09-2005.12
| TypeR |
RWD
3000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSH14-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ65
10.0 k 175mm |
φ65
12.0 k 200mm |
Ft:-45
Rr:-35 |
Ft:-55 to -35
Rr:-45 to -25 |
Ft:-99 to 0
Rr:-79 to 0 |
Rr: Includes helper springs. [Upon EDFC installation] Front: SUPER STREET: Bonnet/hood insulator needs to be cut or removed, if interferes. Rear: SUPER STREET: Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. |
S2000
AP1
1999.04-2005.11
| Base Model, Type V |
RWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/o Spring
GSH64-F1LS1
¥173,000 (MSRP)
¥181,650 (incl TAX) |
- |
- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Rr: Includes helper springs. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Rear: Spare tire needs to be relocated, if interferes. Motor needs to be installed at the specified angle. |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSH64-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ65
10.0 k 175mm |
φ65
10.0 k 175mm |
Ft:-25
Rr:-35 |
Ft:-35 to -15
Rr:-45 to -25 |
Ft:-70 to 0
Rr:-55 to 0 |
Rr: Includes helper springs. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Rear: Spare tire needs to be relocated, if interferes. Motor needs to be installed at the specified angle. |
S2000
AP2
2005.11-2009.01
| Base Model, Type V |
RWD
2200 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/o Spring
GSH64-F1LS1
¥173,000 (MSRP)
¥181,650 (incl TAX) |
- |
- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Rr: Includes helper springs. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Rear: Spare tire needs to be relocated, if interferes. Motor needs to be installed at the specified angle. |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSH64-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ65
10.0 k 175mm |
φ65
10.0 k 175mm |
Ft:-15
Rr:-15 |
Ft:-25 to -5
Rr:-25 to -5 |
Ft:-70 to +41
Rr:-35 to +20 |
Rr: Includes helper springs. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Rear: Spare tire needs to be relocated, if interferes. Motor needs to be installed at the specified angle. |
ACCORD EURO-R
CL7
2002.10-2008.11
| EURO R |
FWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA86-F1SS4
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ65
16.0 k 200mm |
φ65
10.0 k 200mm |
Ft:-50
Rr:-30 |
Ft:-60 to -40
Rr:-40 to -20 |
Ft:-70 to -32
Rr:-50 to -16 |
Ft: For vehicles equipped with auto-leveling headlights, please remove and use the anti-loose bracket from OE shock absorber.
Rr: Rubber upper mount. includes helper springs. [Upon EDFC installation] Front: Bonnet/hood insulator needs to be cut or removed, if interferes. |
ACCORD
CL1
2000.06-2002.10
| |
FWD
2200 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA26-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ70
10.0 k 200mm |
φ65
6.0 k 225mm |
Ft:-25
Rr:-20 |
Ft:-35 to -15
Rr:-30 to -10 |
Ft:-70 to +20
Rr:-53 to +13 |
Rr: Includes helper springs. [Upon EDFC installation] Front: Bonnet/hood insulator needs to be cut or removed, if interferes. Rear: Interior needs to be modified or removed, if it interferes with motor. |
TORNEO EURO-R
CL1
2000.06-2002.10
| |
FWD
2200 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA26-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ70
10.0 k 200mm |
φ65
6.0 k 225mm |
Ft:-25
Rr:-20 |
Ft:-35 to -15
Rr:-30 to -10 |
Ft:-70 to +20
Rr:-53 to +13 |
Rr: Includes helper springs. [Upon EDFC installation] Front: Bonnet/hood insulator needs to be cut or removed, if interferes. Rear: Interior needs to be modified or removed, if it interferes with motor. |
INTEGRA
DC5
2001.07-2004.09
| is |
FWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/o Spring
GSA02-F1LS1
¥217,000 (MSRP)
¥227,850 (incl TAX) |
- |
- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft:-
Rr:- |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA02-F1SS1
¥235,000 (MSRP)
¥246,750 (incl TAX) |
φ70
7.0 k 175mm |
φ70
10.0 k 150mm |
Ft:-30
Rr:-30 |
Ft:-40 to -20
Rr:-40 to -20 |
Ft:-50 to -10
Rr:-40 to -20 |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
INTEGRA
DC5
2004.09-2006.07
| TYPE-S |
FWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/o Spring
GSA02-F1LS1
¥217,000 (MSRP)
¥227,850 (incl TAX) |
- |
- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft:-
Rr:- |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA02-F1SS1
¥235,000 (MSRP)
¥246,750 (incl TAX) |
φ70
7.0 k 175mm |
φ70
10.0 k 150mm |
Ft:-30
Rr:-30 |
Ft:-40 to -20
Rr:-40 to -20 |
Ft:-50 to -10
Rr:-40 to -20 |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
INTEGRA TYPE-R
DC2
1995.10-2001.07
| TYPE-R |
FWD
1800 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/o Spring
GSH48-F1LS1
¥173,000 (MSRP)
¥181,650 (incl TAX) |
- |
- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft: Use the brake bracket from OE shock absorber. Rr: Includes helper springs. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: OE strut bar needs to be removed. Left side motor needs to be intalled at an angle to avoid interference with air conditioner line. Rear: Interior needs to be modified or removed, if it interferes with motor. |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSH48-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ70
10.0 k 175mm |
φ70
6.0 k 175mm |
Ft:-25
Rr:-25 |
Ft:-35 to -15
Rr:-35 to -15 |
Ft:-40 to -5
Rr:-50 to +10 |
Ft: Use the brake bracket from OE shock absorber. Rr: Includes helper springs. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: OE strut bar needs to be removed. Left side motor needs to be intalled at an angle to avoid interference with air conditioner line. Rear: Interior needs to be modified or removed, if it interferes with motor. |
INTEGRA TYPE-R
DC5
2001.07-2004.09
| TYPE-R |
FWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/o Spring
GSA02-F1LS1
¥217,000 (MSRP)
¥227,850 (incl TAX) |
- |
- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft:-
Rr:- |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA02-F1SS1
¥235,000 (MSRP)
¥246,750 (incl TAX) |
φ70
7.0 k 175mm |
φ70
10.0 k 150mm |
Ft:-30
Rr:-30 |
Ft:-40 to -20
Rr:-40 to -20 |
Ft:-50 to -10
Rr:-40 to -20 |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
INTEGRA TYPE-R
DC5
2004.09-2006.07
| TYPE-R |
FWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/o Spring
GSA02-F1LS1
¥217,000 (MSRP)
¥227,850 (incl TAX) |
- |
- |
Ft:-
Rr:- |
Ft:-
Rr:- |
Ft:-
Rr:- |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA02-F1SS1
¥235,000 (MSRP)
¥246,750 (incl TAX) |
φ70
7.0 k 175mm |
φ70
10.0 k 150mm |
Ft:-30
Rr:-30 |
Ft:-40 to -20
Rr:-40 to -20 |
Ft:-50 to -10
Rr:-40 to -20 |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. Kit w/o Spring: Discontinued and only available while supplies last. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed as parallel to vehicle body as possible, due to insufficient clearance. |
CIVIC
EG6
1991.09-1995.09
| SiR |
FWD
1600 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSH48-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ70
10.0 k 175mm |
φ70
6.0 k 175mm |
Ft:-30
Rr:-25 |
Ft:-40 to -20
Rr:-35 to -15 |
Ft:-45 to -10
Rr:-50 to +10 |
Ft: Use the brake bracket from OE shock absorber. Rr: Includes helper springs. [Upon EDFC installation] Front: OE strut bar needs to be removed. Rear: Interior needs to be removed, to avoid interference. |
CIVIC TYPE-R
EK9
1997.08-2000.08
| TYPE-R |
FWD
1600 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSH00-F1SS1
¥191,000 (MSRP)
¥200,550 (incl TAX) |
φ70
10.0 k 175mm |
φ70
6.0 k 175mm |
Ft:-20
Rr:-25 |
Ft:-30 to -10
Rr:-35 to -15 |
Ft:-37 to +10
Rr:-45 to 0 |
Rr: Includes helper springs. [Upon EDFC installation] Front: OE strut bar needs to be removed. Rear: Motor needs to be installed parallel to the Interior. |
CIVIC TYPE-R
EP3
2001.10-2005.09
| TYPE-R |
FWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-12120 |
| Strut | - |
|
w/ Spring
GSA12-F1SS1
¥235,000 (MSRP)
¥246,750 (incl TAX) |
φ70
7.0 k 175mm |
φ70
10.0 k 150mm |
Ft:-20
Rr:-5 |
Ft:-30 to -10
Rr:-15 to +5 |
Ft:-30 to 0
Rr:-15 to +5 |
The camber adjustment range is limited due to the vehicle characteristics; therefore, it needs to be adjusted within the proper adjustable range of toe angle. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. Rear: Motor needs to be installed at the specified angle. |
CIVIC TYPE-R
FD2
2007.03-2010.08
| TYPE-R |
FWD
2000 |
 |
| Controller | EDK04-K4469(Black) |
| | EDK04-P2756(Silver) |
| Motor | EDK05-10120 |
| Strut | - |
|
w/ Spring
GSB56-F1AS1
¥237,000 (MSRP)
¥248,850 (incl TAX) |
φ70
7.0 k 200mm |
Exclusive Spring
7.0 k |
Ft:-10
Rr:-15 |
Ft:-20 to 0
Rr:-25 to -5 |
Ft:-30 to +10
Rr:-30 to 0 |
Includes H.A.S. Rr: w/o Upper Mount. [Upon EDFC installation] Front: MONO FLEX: Motor and harness need to be waterproofed with silicon sealant. |