MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible model. May be installed but the operation not guaranteed. NOT compatible
Specific model that the product will be developed for and tested on. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜CW6W
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 BASE
RIDE
HEIGHT
DROP
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
MITSUBISHI

OUTLANDER

2007.10-2009.08		3000

4WD		CW6WMS, G
GSR98-91SS2
JPY 92,000
4 leftF

STD
-60-85to-3749.0/5.0
-70to-50250/
R

STD
-40-70to-2939.2/4.0
-50to-30250/Φ70
[ NOTE ] RR: SHOCK ABSORBER NEEDS TO BE DETACHED FROM VEHICLE, WHEN ADJUSTING DAMPING FORCE. OE SPRING INSULATOR NEEDS TO BE MODIFIED. 
MITSUBISHI

OUTLANDER

2007.10-2009.08		3000

4WD		CW6WMS, G
Equivalent of
SUPER WAGON
CM-DSR98-91SS3
JPY 199,000
Made-to-order

Approx. 1.5 months
after receipt
of order
F

R/U
-65-85to-4449.0/5.0
-75to-55250/
R

R/U
-40-55to-939.2/4.0
-50to-30225/Φ70
[ NOTE ] RR: USE OF EDFC SERIES IS RECOMMENDED, AS IT IS DIFFICULT TO ADJUST DAMPING FORCE BY HAND DUE TO VEHICLE STRUCTURE. 

     [OE SHAPE] SINGLE DAMPER
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE PRODUCT NAME C
O
M
P
A
T
I
B
I
L
I
T
Y		 FRONT
REAR		 PART NUMBER

MSRP
(excl. TAX)		 STOCK

SCHED
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
 DAMPING
FORCE
ADJUST-
MENT		 UPPER
MOUNT		 NOTE
MITSUBISHI

OUTLANDER

2007.10-2009.08		3000

4WD		CW6WMS, GFRONT
LEFT
VSR98-A1MS2-L
JPY 22,000
2 left

STD
 
FRONT
RIGHT
VSR98-A1MS2-R
JPY 22,000
2 left

STD
 
REAR
VSR99-A1MS2
JPY 12,000
4 left

STD
 NOT COMPATIBLE WITH 3-ROW VEHICLE MODEL SOLD OUTSIDE OF JAPAN.
MITSUBISHI

OUTLANDER

2007.10-2009.08		3000

4WD		CW6WMS, GFRONT
LEFT
VSR98-B1MS2-L
JPY 24,000
2 left

STD
 
FRONT
RIGHT
VSR98-B1MS2-R
JPY 24,000
2 left

STD
 
REAR
VSR99-B1MS2
JPY 14,000
4 left

STD
 NOT COMPATIBLE WITH 3-ROW VEHICLE MODEL SOLD OUTSIDE OF JAPAN.
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.