MAKE MODEL YEAR
Product MATRIX
Product LIST		Incl. Overseas Models.PRODUCT:
  CHASSIS CODE:
OE Shapes only
OR
Type part number 
Must enter a minimum of 3 characters


 
 
Marks of compatibility:
Compatible. May be installed but the operation not guaranteed. NOT compatible.
Under Development. Compatible with vehicle made/designed for overseas.
Marks of EDFC compatibility:
OK Extention Kit required. Motor install location is not confirmed.
Ride height adjustable range is calculated data and not confirmed on actual vehicle.
Disclaimer:The stock availability shown below is not guaranteed. Orders are processed as they are received.
RESULT｜4X4 DAMPER SPORT
     COILOVER KIT
     STREET
C
H
A
R
A
C
T
E
R
I
S
T
I
C
S
 MODEL

YEAR		 ENGINE DISPLACEMENT

DRIVE TRAIN LAYOUT
*FF=FWD
FR/MR/RR=RWD
4WD=AWD		 CHASSIS CODE GRADE C
O
M
P
A
T
I
B
I
L
I
T
Y		 PRODUCT NAME PART NUMBER

MSRP
Including TAX
Excluding TAX		 STOCK

SCHED
I
n
c
l
u
d
e		S
P
R
I
N
G
S
E
D
F
C		C
O
M
P
A
T
I
B
I
L
I
T
Y
   DAMPING
FORCE
ADJUST-
MENT		 FULL-
LENGTH
RIDE-
HEIGHT
ADJUST-
ABLE		 UPPER
MOUNT		 RIDE
HEIGHT
CHANGE
(mm)		 RIDE HEIGHT
ADJUSTABLE
RANGE
(mm)		 SPRING
MAX
LOW - HI		 RATE
(N/mm / Kgf/mm)
RECOMMENDED
LOW - HI		 FREE
LENGTH
(mm)		 / I.D.(mm)
TOYOTA

FJ CRUISER

2010.11-2018.01		4000

4WD		GSJ15WBASE MODEL
VSTG0-F1SS2
JPY 149,600 inc
JPY 136,000 exc
4 leftF

STD
+40-20to+62103.0/10.5
+30to+50365/
R

STD
+40－to－44.1/4.5
－to－388/
[ NOTE ] NOT COMPATIBLE WITH VEHICLES MANUFACTURED IN OCT 2010 OCTOBER EARLIER. RR: NOT RIDE HEIGHT ADJUSTABLE.
TOYOTA

HILUX

2017.10-2020.07		2400

4WD		GUN125Z, X
VSTC2-F1SS2
JPY 144,100 inc
JPY 131,000 exc
1 left
F

STD
+40-26to+57117.6/12.0
+30to+50325/
R

STD
+40－to－ 
－to－ 
[ NOTE ] RIDE HEIGHT MUST BE SET/ADJUSTED WITHIN THE RANGE ALLOWED BY JAPAN'S VEHICLE SAFETY REGULATIONS(+/-40MM IN TOTAL HEIGHT). DOES NOT COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS ON FORWARD/LATERAL FIELD VISIONS AND THE HEIGHT OF UNDERRUN PROTECTIVE DEVICES.REAR BUMPER POSITION NEEDS TO BE ADJUSTED,IF REAR UNDERUN PROTECTION DEVICE(RUPD)DOES NOT MEET JAPAN'S VEHICLE SAFETY REGULATIONS(HEIGHT:550MM)WHEN RAISING REAR HEIGHT,REAR FOG LAMP NEEDS TO BE REPOSITIONED OR REMOVED TO COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS. RR: NOT RIDE HEIGHT ADJUSTABLE.
TOYOTA

HILUX

2020.08+		2400

4WD		GUN125Z, X
VSTC2-F1SS2
JPY 144,100 inc
JPY 131,000 exc
1 left
F

STD
+40-26to+57117.6/12.0
+30to+50325/
R

STD
+40－to－ 
－to－ 
[ NOTE ] RIDE HEIGHT MUST BE SET/ADJUSTED WITHIN THE RANGE ALLOWED BY JAPAN'S VEHICLE SAFETY REGULATIONS(+/-40MM IN TOTAL HEIGHT). DOES NOT COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS ON FORWARD/LATERAL FIELD VISIONS AND THE HEIGHT OF UNDERRUN PROTECTIVE DEVICES.REAR BUMPER POSITION NEEDS TO BE ADJUSTED,IF REAR UNDERUN PROTECTION DEVICE(RUPD)DOES NOT MEET JAPAN'S VEHICLE SAFETY REGULATIONS(HEIGHT:550MM)WHEN RAISING REAR HEIGHT,REAR FOG LAMP NEEDS TO BE REPOSITIONED OR REMOVED TO COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS. RR: NOT RIDE HEIGHT ADJUSTABLE.
TOYOTA

HILUX GR SPORT

2021.10+		2400

4WD		GUN125Z GR SPORT
VSTC2-F1SS2
JPY 144,100 inc
JPY 131,000 exc
1 left
F

STD
+40-26to+57117.6/12.0
+30to+50325/
R

STD
+40－to－ 
－to－ 
[ NOTE ] RIDE HEIGHT MUST BE SET/ADJUSTED WITHIN THE RANGE ALLOWED BY JAPAN'S VEHICLE SAFETY REGULATIONS(+/-40MM IN TOTAL HEIGHT).REAR BUMPER POSITION NEEDS TO BE ADJUSTED,IF REAR UNDERUN PROTECTION DEVICE(RUPD)DOES NOT MEET JAPAN'S VEHICLE SAFETY REGULATIONS(HEIGHT:550MM)WHEN RAISING REAR HEIGHT,REAR FOG LAMP NEEDS TO BE REPOSITIONED OR REMOVED TO COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS. RR: NOT RIDE HEIGHT ADJUSTABLE.
TOYOTA

LAND CRUISER

2009.04-2021.07		4600

4WD		URJ202WGX, AX
VSC90-F1SS2
JPY 155,100 inc
JPY 141,000 exc
Good
in
stock
F

STD
+40-35to+50117.7/12.0
+30to+50425/
R

STD
+40－to－37.6/3.8
－to－444/
[ NOTE ] NOT COMPATIBLE WITH VEHICLE WITH AHC. NOT TESTED ON 5 SEATER MODEL. HYDRAULIC SYSTEM ON KDSS-EQUIPPED VEHICLE NEEDS TO BE READJUSTED. RR: NOT RIDE HEIGHT ADJUSTABLE.
TOYOTA

LAND CRUISER

1998.01-2007.08		4700

4WD		UZJ100WVX
VSTH4-F1SS2
JPY 127,600 inc
JPY 116,000 exc
4 left
F

STD
+40－to－ 
－to－ 
R

STD
+40－to－29.4/3.0
－to－500/
[ NOTE ] NOT COMPATIBLE WITH VEHICLE WITH AHC. TO ADJUST (LIFT) FRONT RIDE HEIGHT, 3RD-PARTY TORSION BAR IS REQUIRED. 

Under Development.

TOYOTA

LAND CRUISER

2021.08+		3500

4WD		VJA300WVX, AX ,GX
TOYOTA

LAND CRUISER PRADO

2005.07-2009.08		4000

4WD		GRJ120WTX
VSTF4-F1SS2
JPY 149,600 inc
JPY 136,000 exc
2 leftF

STD
+40-10to+67103.0/10.5
+30to+50365/
R

STD
+40－to－44.1/4.5
－to－420/
[ NOTE ]  RR: NOT RIDE HEIGHT ADJUSTABLE.
TOYOTA

LAND CRUISER PRADO

2009.09-2015.05		4000

4WD		GRJ150WTX, TZ
VSTG0-F1SS2
JPY 149,600 inc
JPY 136,000 exc
4 left
F

STD
+40-31to+50103.0/10.5
+30to+50365/
R

STD
+40－to－44.1/4.5
－to－388/
[ NOTE ] EDFC SERIES IS NOT COMPATIBLE WITH PRODUCTS WITH LOT NO.25004 OR BEFORE. RR: NOT RIDE HEIGHT ADJUSTABLE.
SUZUKI

JIMNY

2018.07+		660

4WD		JB64WXC, XL, XG
VSUC2-F1SS2
JPY 117,700 inc
JPY 107,000 exc
Good
in
stock		F

STD
+55－to－24.5/2.5
－to－366/
R

STD
+40－to－21.6/2.2
－to－333/
[ NOTE ] ADDITIONAL DEVICE, SUCH AS MIRROR OR CAMERA, IS REQUIRED TO SECURE THE FRONT VISION, IN ORDER TO COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS ON FORWARD/LATERAL FIELD VISIONS. REPLACEMENT OF BRAKE HOSE (WITH 50MM+ LONGER ONE THAN OE) AND LOCKING HUB VACUUM HOSE IS REQUIRED. REPLACEMENT OF CASTER-CORRECTIONS BUSHINGS AND LATERAL ROD IS RECOMMENDED. NOT RIDE HEIGHT ADJUSTABLE. FT: WHEN TIGHTENING, BE SURE TO APPLY THE APPROPRIATE TORQUE AS SPECIFIED IN THE INCLUDED MANUAL. OVER-TORQUING MIGHT LEAD TO PISTON ROD DAMAGE/BREAKAGE.
SUZUKI

JIMNY SIERRA

2018.07+		1500

4WD		JB74WJC,JL
VSUC2-F1SS2
JPY 117,700 inc
JPY 107,000 exc
Good
in
stock		F

STD
+55－to－24.5/2.5
－to－366/
R

STD
+40－to－21.6/2.2
－to－333/
[ NOTE ] ADDITIONAL DEVICE, SUCH AS MIRROR OR CAMERA, IS REQUIRED TO SECURE THE FRONT VISION, IN ORDER TO COMPLY WITH JAPAN'S VEHICLE SAFETY REGULATIONS ON FORWARD/LATERAL FIELD VISIONS. REPLACEMENT OF BRAKE HOSE (WITH 50MM+ LONGER ONE THAN OE) AND LOCKING HUB VACUUM HOSE IS REQUIRED. REPLACEMENT OF CASTER-CORRECTIONS BUSHINGS AND LATERAL ROD IS RECOMMENDED. NOT RIDE HEIGHT ADJUSTABLE. FT: WHEN TIGHTENING, BE SURE TO APPLY THE APPROPRIATE TORQUE AS SPECIFIED IN THE INCLUDED MANUAL. OVER-TORQUING MIGHT LEAD TO PISTON ROD DAMAGE/BREAKAGE.
Click to view
Remote-Damping-Force-Controller
EDFC compatibility.
  • Ride height data/value is observed through testing on R&D Vehicles and shown as a reference.
    The actual value may vary depending on individual difference of vehicles and/or installation conditions.
    There may be difference in right and left settings.
    Ride height may become lower after break-in period.
    Ride height data/value is in comparison to OE height.
  • Recommended ride height adjustment range value is the data obtained from actual testing.
  • Adjusting outside the recommended ride height range might damage damper/vehicle and is nonconforming to safety standards.
    TEIN assumes NO responsibility whatsoever for use outside recommended range.
  • Some interference may be caused, even at the standard ride height setting, depending on the tire size, brand and offset of wheels used.
Copyright TEIN, INC. All rights reserved.