HOME >> PRICE LIST >> Browse by products >> MAZDA || PRODUCTS
=Specific model that the product is developed for and tested on.We have developed and set up the product to be most suitable for the particular vehicle model.
=Specific model that the product will be developed for and tested on.
=Compatible model.
=Compatible model. (Needs to adjust the position of the spring seat)
=May be installed but the operation not guaranteed. (The reason is noted in the chart)
Compatible model: Testing on the actual vehicle confirmed the compatibility and the same level of performance, as the model the product was developed for.
Silver EDFC Controller (EDK04-P2756) rereleased for a limited time.
Back by popular demand, 300 sets have been specially prepared.
But be quick! Only while stocks last.
Model
Chassis Code		 Grade Drive System
Displacement		 Conformity EDFC
Conformity		 Kit Part No.
MSRP		 Set Spring Ride Height
Drop
 Recommended
Ride Height
Adjustment Range 		Ride Height
Adjustable Range		 Note
Ft Rr
RX-7
FC3S
1985.09-1991.12 		GT-R, GT-X, GT-Limited, GT RWD
654
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
GSM00-B1SS4
¥142,000 (MSRP)
¥149,100 (incl TAX)		 φ70
5.0 k 200mm		 φ70
4.0 k 250mm		 Ft:-25
Rr:-25		 Ft:-35 to -15
Rr:-35 to -15		 Ft:-43 to -6
Rr:-45 to -3		 Ft: Pillow ball upper mount. Ft: Includes helper springs.
[Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.
RX-7
FD3S
1991.12-2002.08 		RZ, RS, RB-BASAUST, RB Touring X RWD
654
Controller-
Motor-
Strut-
 w/o Uppermount
GSM32-A1SS2
¥105,000 (MSRP)
¥110,250 (incl TAX)		 φ70
8.0 k 175mm		 φ70
7.0 k 225mm		 Ft:-30
Rr:-20		 Ft:-40 to -20
Rr:-30 to -10		 Ft:-49 to -20
Rr:-40 to -10		 For Kit w/o upper mount: OE mount needs to be modified with included file. EDFC: ONLY compatible with 'Kit w/ upper mount' Ft: Includes helper springs.
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM32-B1SS3
¥131,000 (MSRP)
¥137,550 (incl TAX)		 φ70
8.0 k 175mm		 φ70
7.0 k 225mm		 Ft:-30
Rr:-20		 Ft:-40 to -20
Rr:-30 to -10		 Ft:-43 to -18
Rr:-40 to +2		 Ft: Includes helper springs.
[Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Interior needs to be cut or removed, to avoid interference. Strut bar can NOT be used.
RX-8
SE3P
2003.04-2008.02 		Base Model, Type E, Type S RWD
654
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM56-B1SS3
¥142,000 (MSRP)
¥149,100 (incl TAX)		 φ70
5.0 k 225mm		 φ70-90
4.0 k 250mm		 Ft:-20
Rr:-15		 Ft:-30 to -10
Rr:-25 to -5		 Ft:-45 to -10
Rr:-40 to +5		 Rr: Taper spring
[Upon EDFC installation]
Front:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.

Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.
RX-8
SE3P
2008.03+ 		Base Model, Type E, Type S RWD
654
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM56-B1SS3
¥142,000 (MSRP)
¥149,100 (incl TAX)		 φ70
5.0 k 225mm		 φ70-90
4.0 k 250mm		 Ft:-20
Rr:-15		 Ft:-30 to -10
Rr:-25 to -5		 Ft:-45 to -10
Rr:-40 to +5		 Rr: Taper spring
[Upon EDFC installation]
Front:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.

Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.
AXELA
BK3P
2003.10-2009.05 		23S FWD
2300
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/o Uppermount
GSM24-A1AS2
¥139,000 (MSRP)
¥145,950 (incl TAX)		 φ70
5.0 k 225mm		 Exclusive Spring
4.0 k		 Ft:-25
Rr:-20		 Ft:-35 to -15
Rr:-30 to -10		 Ft:-45 to -15
Rr:-36 to -10		 Includes H.A.S.

[Upon EDFC installation]
Front:
Ground wire above left side upper mount needs to be displaced to avoid interference.

Rear:
Motor and its joint part need to be waterproofed with silicon sealant.
AXELA SPORT
BKEP
2003.10-2009.05 		20C, 20S, 20H FWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/o Uppermount
GSM24-A1AS2
¥139,000 (MSRP)
¥145,950 (incl TAX)		 φ70
5.0 k 225mm		 Exclusive Spring
4.0 k		 Ft:-25
Rr:-25		 Ft:-35 to -20
Rr:-35 to -15		 Ft:-45 to -20
Rr:-40 to -6		 Includes H.A.S.

[Upon EDFC installation]
Front:
Ground wire above left side upper mount needs to be displaced to avoid interference.

Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. Motor needs to be installed facing backward.
AXELA SPORT
BK3P
2003.10-2009.05 		23S FWD
2300
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/o Uppermount
GSM24-A1AS2
¥139,000 (MSRP)
¥145,950 (incl TAX)		 φ70
5.0 k 225mm		 Exclusive Spring
4.0 k		 Ft:-25
Rr:-20		 Ft:-35 to -15
Rr:-30 to -10		 Ft:-45 to -15
Rr:-36 to -10		 Includes H.A.S.

[Upon EDFC installation]
Front:
Ground wire above left side upper mount needs to be displaced to avoid interference.

Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. S.L.C./ motor needs to be installed facing backward.
AXELA SPORT
BLEFW
2009.06+ 		20C, 20S FWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/o Uppermount
GSM98-A1AS2
¥139,000 (MSRP)
¥145,950 (incl TAX)		 φ70
5.0 k 225mm		 Exclusive Spring
4.0 k		 Ft:-35
Rr:-35		 Ft:-40 to -25
Rr:-40 to -25		 Ft:-59 to -25
Rr:-54 to -20		 Includes H.A.S.

[Upon EDFC installation]
Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. Motor needs to be installed facing forwards.
AXELA SEDAN
BLEFP
2009.06+ 		20C, 20E FWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/o Uppermount
GSM98-A1AS2
¥139,000 (MSRP)
¥145,950 (incl TAX)		 φ70
5.0 k 225mm		 Exclusive Spring
4.0 k		 Ft:-35
Rr:-35		 Ft:-40 to -25
Rr:-40 to -25		 Ft:-59 to -25
Rr:-54 to -20		 Includes H.A.S.

[Upon EDFC installation]
Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. Motor needs to be installed facing forwards.
ATENZA SPORT
GG3S
2002.05-2007.12 		23S, 23C, 23Z FWD
2300
Controller-
Motor-
Strut-
 w/o Uppermount
GSM68-A1AS2
¥118,000 (MSRP)
¥123,900 (incl TAX)		 φ70-90
8.0 k 200mm		 Exclusive Spring
5.8 k		 Ft:-35
Rr:-25		 Ft:-45 to -25
Rr:-35 to -15		 Ft:-59 to -25
Rr:-46 to +3		 Includes H.A.S.
For Kit w/o upper mount: Rr: Tapered Spring, Data applies to vehicle with VIN 115927 or earlier. For VIN 115928 or later, the same height can be achieved by lowering Ft spring seat by 5mm. EDFC: ONLY compatible with 'Kit w/ upper mount'
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM68-B1AS3
¥144,000 (MSRP)
¥151,200 (incl TAX)		 φ70
8.0 k 225mm		 Exclusive Spring
5.8 k		 Ft:-35
Rr:-25		 Ft:-45 to -25
Rr:-35 to -15		 Ft:-55 to -25
Rr:-46 to +3		 Includes H.A.S.

[Upon EDFC installation]
Rear:
SUPER STREET (w/ Upper Mount): Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. Motor needs to be installed facing backward.
MAZDASPEED AXELA
BK3P
2006.06-2009.05 		MAZDASPEED FWD
2300
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/o Uppermount
GSM24-A1AS2
¥139,000 (MSRP)
¥145,950 (incl TAX)		 φ70
5.0 k 225mm		 Exclusive Spring
4.0 k		 Ft:-20
Rr:-20		 Ft:-30 to -10
Rr:-30 to -10		 Ft:-45 to -10
Rr:-36 to -10		 Includes H.A.S.

[Upon EDFC installation]
Front:
Ground wire above left side upper mount needs to be displaced to avoid interference.

Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. S.L.C./ motor needs to be installed facing backward.
MAZDASPEED AXELA
BL3FW
2009.06+ 		MAZDASPEED FWD
2300
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/o Uppermount
GSM98-A1AS2
¥139,000 (MSRP)
¥145,950 (incl TAX)		 φ70
5.0 k 225mm		 Exclusive Spring
4.0 k		 Ft:-35
Rr:-25		 Ft:-40 to -35
Rr:-35 to -20		 Ft:-64 to -25
Rr:-49 to -15		 Includes H.A.S.
Spring seat position: Ft=+5/Rr=+4mm compared to BLEFW. When using OE tire/wheel size: Ft: If lowering below recommended ride height range, spring seat may interfere with tire. Please check and make sure there is no interference when adjusting ride height. *Recommended tire/wheel size* Tire: 225/40-18, Wheel: 18x7.5J inset less than 48
[Upon EDFC installation]
Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. Motor needs to be installed facing forwards.
MAZDASPEED ATENZA
GG3P
2005.08-2007.12 		MAZDASPEED AWD
2300
Controller-
Motor-
Strut-
 w/o Uppermount
GSM68-A1AS2
¥118,000 (MSRP)
¥123,900 (incl TAX)		 φ70-90
8.0 k 200mm		 Exclusive Spring
5.8 k		 Ft:-55
Rr:-40		 Ft:-65 to -54
Rr:-50 to -30		 Ft:-87 to -54
Rr:-61 to -12		 Includes H.A.S.
Spring seat position: Ft=+7 compared to GG3S. NOT EDFC compatible.
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM68-B1AS3
¥144,000 (MSRP)
¥151,200 (incl TAX)		 φ70
8.0 k 225mm		 Exclusive Spring
5.8 k		 Ft:-55
Rr:-40		 Ft:-65 to -51
Rr:-50 to -30		 Ft:-87 to -51
Rr:-61 to -12		 Includes H.A.S.
Spring seat position: Ft=+7 compared to GG3S.
[Upon EDFC installation]
Rear:
SUPER STREET (w/ Upper Mount): Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Motor and its joint part need to be waterproofed with silicon sealant. Motor needs to be installed facing forwards.
ROADSTER
NA6CE
1989.09-1998.01 		S-Special, V-Special RWD
1600
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-10140
StrutEDK06-K4474
 w/o Uppermount
GSM40-A1SS2
¥105,000 (MSRP)
¥110,250 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-25
Rr:-30		 Ft:-35 to -15
Rr:-40 to -20		 Ft:-45 to +4
Rr:-50 to +3		 For Kit w/o upper mount: Spare tire needs to be relocated and anchored, to avoid interference with Rr shaft top. OE mount needs to be modified with included file. May not be lowered well depending on vehicle Trim Level and/or weight.
[Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Spare tire needs to be relocated.
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM40-B1SS3
¥131,000 (MSRP)
¥137,550 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-30
Rr:-35		 Ft:-40 to -20
Rr:-45 to -25		 Ft:-47 to -7
Rr:-55 to -10		 May not be lowered well depending on vehicle Trim Level and/or weight.
[Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Spare tire needs to be relocated.
ROADSTER
NA8C
1993.08-1997.12 		S-Special, V-Special, M-Package RWD
1800
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-10140
StrutEDK06-K4474
 w/o Uppermount
GSM40-A1SS2
¥105,000 (MSRP)
¥110,250 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-25
Rr:-35		 Ft:-35 to -15
Rr:-45 to -25		 Ft:-45 to +4
Rr:-45 to -2		 For Kit w/o upper mount: Spare tire needs to be relocated and anchored, to avoid interference with Rr shaft top. OE mount needs to be modified with included file. May not be lowered well depending on vehicle Trim Level and/or weight.
[Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Spare tire needs to be relocated.
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM40-B1SS3
¥131,000 (MSRP)
¥137,550 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-30
Rr:-35		 Ft:-40 to -20
Rr:-45 to -25		 Ft:-47 to -7
Rr:-55 to -10		 May not be lowered well depending on vehicle Trim Level and/or weight.
[Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Spare tire needs to be relocated.
ROADSTER
NB6C
1998.01-2005.08 		Base Model, M-Package, Special Package RWD
1600
Controller-
Motor-
Strut-
 w/o Uppermount
GSM40-A1SS2
¥105,000 (MSRP)
¥110,250 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-25
Rr:-40		 Ft:-35 to -15
Rr:-50 to -30		 Ft:-45 to -6
Rr:-60 to -22		 [Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Interior needs to be modified or removed, if it interferes with motor.
Controller-
Motor-
Strut-
 w/ Uppermount
GSM40-B1SS3
¥131,000 (MSRP)
¥137,550 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-30
Rr:-45		 Ft:-40 to -20
Rr:-55 to -35		 Ft:-47 to -7
Rr:-65 to -25		 [Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Interior needs to be modified or removed, if it interferes with motor.
ROADSTER
NB8C
1998.01-2005.08 		S, RS, VS RWD
1800
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-10140
StrutEDK06-K4474
 w/o Uppermount
GSM40-A1SS2
¥105,000 (MSRP)
¥110,250 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-15
Rr:-35		 Ft:-25 to -5
Rr:-45 to -25		 Ft:-35 to +5
Rr:-55 to -17		 [Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Interior needs to be modified or removed, if it interferes with motor.
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM40-B1SS3
¥131,000 (MSRP)
¥137,550 (incl TAX)		 φ70
6.0 k 200mm		 φ70
5.0 k 200mm		 Ft:-15
Rr:-35		 Ft:-25 to -5
Rr:-45 to -25		 Ft:-32 to +8
Rr:-55 to -15		 [Upon EDFC installation]
Front:
Left side connector (on vehicle side) needs to be relocated, if it interferes.

Rear:
Interior needs to be modified or removed, if it interferes with motor.
ROADSTER
NCEC
2005.08+ 		RS, VS, ROADSTER RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
GSM74-B1SS3
¥142,000 (MSRP)
¥149,100 (incl TAX)		 φ70
4.0 k 225mm		 φ70-90
3.0 k 250mm		 Ft:-30
Rr:-25		 Ft:-40 to -20
Rr:-35 to -15		 Ft:-53 to -20
Rr:-40 to -4		 Rr: Taper spring
[Upon EDFC installation]
Front:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.
* P/U: Pillowball Uppermount R/U: Reinforced Rubber Uppermount
*Recommended adjustment range value is the data obtained from actual testing.
*Adjusting outside recommended range might damage damper/vehicle and is nonconforming to safety standards.
*TEIN assumes NO responsibility for use outside recommended range.
*Some modification may be required to be EDFC compatible, depending on the vehicle models. Contact us for more details.
Drop us a line, ask us any questions! about Products:
Click Here