HOME >> PRICE LIST >> Browse by products >> NISSAN || PRODUCTS
=Specific model that the product is developed for and tested on.We have developed and set up the product to be most suitable for the particular vehicle model.
=Specific model that the product will be developed for and tested on.
=Compatible model.
=Compatible model. (Needs to adjust the position of the spring seat)
=May be installed but the operation not guaranteed. (The reason is noted in the chart)
Compatible model: Testing on the actual vehicle confirmed the compatibility and the same level of performance, as the model the product was developed for.
Silver EDFC Controller (EDK04-P2756) rereleased for a limited time.
Back by popular demand, 300 sets have been specially prepared.
But be quick! Only while stocks last.
Model
Chassis Code		 Grade Drive System
Displacement		 Conformity EDFC
Conformity		 Kit Part No.
MSRP		 Set Spring Ride Height
Drop		 Recommended
Ride Height
Adjustment Range 		Ride Height
Adjustable Range 		Note
Ft Rr
180SX
RS13
1989.04-1990.12 		Type l, ll RWD
1800
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN20-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-45
Rr:-25		 Ft:-55 to -35
Rr:-35 to -15		 Ft:-88 to +53
Rr:-124 to +55		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Body panel might need to be modified (bent), if clearance between motor and body panel is insufficient. Motor needs to be installed at the specified angle. Interior needs to be cut or removed.
180SX
KRS13
1989.04-1990.12 		Type l, ll RWD
1800
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN20-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-45
Rr:-25		 Ft:-55 to -35
Rr:-35 to -15		 Ft:-88 to +53
Rr:-124 to +55		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Body panel might need to be modified (bent), if clearance between motor and body panel is insufficient. Motor needs to be installed at the specified angle. Interior needs to be cut or removed.
180SX
RPS13
1991.01-1999.02 		Type l, ll, lll, G, R, X, S RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN20-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-45
Rr:-25		 Ft:-55 to -35
Rr:-35 to -15		 Ft:-88 to +53
Rr:-124 to +55		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Body panel might need to be modified (bent), if clearance between motor and body panel is insufficient. Motor needs to be installed at the specified angle. Interior needs to be cut or removed.
180SX
KRPS13
1991.01-1999.02 		Type l, ll, lll, G, R, X, S RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN20-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-45
Rr:-25		 Ft:-55 to -35
Rr:-35 to -15		 Ft:-88 to +53
Rr:-124 to +55		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Body panel might need to be modified (bent), if clearance between motor and body panel is insufficient. Motor needs to be installed at the specified angle. Interior needs to be cut or removed.
SILVIA
S13
1988.05-1990.12 		J's, Q's, K's RWD
1800
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN20-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-45
Rr:-25		 Ft:-55 to -35
Rr:-35 to -15		 Ft:-88 to +53
Rr:-109 to +55		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Interior needs to be cut or removed, if it interferes with motor.
SILVIA
PS13
1991.01-1993.10 		J's, Q's, K's RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN20-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-45
Rr:-25		 Ft:-55 to -35
Rr:-35 to -15		 Ft:-88 to +53
Rr:-109 to +55		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Interior needs to be cut or removed, if it interferes with motor.
SILVIA
KPS13
1991.01-1993.10 		J's, Q's, K's RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN20-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-45
Rr:-25		 Ft:-55 to -35
Rr:-35 to -15		 Ft:-88 to +53
Rr:-109 to +55		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Interior needs to be cut or removed, if it interferes with motor.
SILVIA
S14
1993.10-1998.12 		J's, Q's, K's RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN66-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
6.0 k 225mm		 φ65
5.0 k 250mm		 Ft:-60
Rr:-40		 Ft:-70 to -50
Rr:-50 to -30		 Ft:-105 to +39
Rr:-184 to +1		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.
SILVIA
S15
1999.01-2002.08 		Spec R, Spec S RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN52-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ65
5.0 k 225mm		 φ65
4.0 k 250mm		 Ft:-35
Rr:-35		 Ft:-45 to -25
Rr:-45 to -25		 Ft:-94 to +57
Rr:-170 to +7
SKYLINE
HCR32
1989.05-1993.08 		GTS-t TypeM, GTS TypeS RWD
2000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-10140
StrutEDK06-K4474
 w/o Uppermount
DSN18-71SS2
¥110,000 (MSRP)
¥115,500 (incl TAX)		 φ65
6.0 k 200mm		 φ65
5.0 k 250mm		 Ft:-30
Rr:-25		 Ft:-40 to -20
Rr:-35 to -15		 Ft:-91 to +12
Rr:-162 to 0		 NOT compatible with cold weather package. Kit for BNR32 is compatible with Type M cold weather package.
[Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, if interferes.

Rear:
Interior needs to be cut or removed, if it interferes with motor.
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN18-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
6.0 k 200mm		 φ65
5.0 k 250mm		 Ft:-30
Rr:-25		 Ft:-40 to -20
Rr:-35 to -15		 Ft:-91 to +12
Rr:-162 to 0		 NOT compatible with cold weather package. Kit for BNR32 is compatible with Type M cold weather package.
[Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, if interferes.

Rear:
Interior needs to be cut or removed, if it interferes with motor.
SKYLINE
HNR32
1989.08-1993.07 		GTS-4 AWD
2000
Controller-
Motor-
Strut-
 w/ Uppermount
DSN14-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-50
Rr:-30		 Ft:-60 to -40
Rr:-40 to -20		 Ft:-97 to -8
Rr:-147 to +35		 NOT EDFC compatible
SKYLINE
BNR32
1989.08-1994.12 		GT-R, V-Spec AWD
2600
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN14-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-50
Rr:-35		 Ft:-60 to -40
Rr:-45 to -25		 Ft:-97 to -8
Rr:-109 to +18		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
Interior needs to be cut or removed, if it interferes with motor.
SKYLINE
HR32
1991.08-1993.08 		GTE TypeX RWD
2000
Controller-
Motor-
Strut-
 w/o Uppermount
DSN18-71SS2
¥110,000 (MSRP)
¥115,500 (incl TAX)		 φ65
6.0 k 200mm		 φ65
5.0 k 250mm		 Ft:-30
Rr:-25		 Ft:-40 to -20
Rr:-35 to -15		 Ft:-91 to +12
Rr:-162 to -15		 NOT compatible with cold weather package. Shell case length: Ft=+3mm compared to standard. NOT EDFC compatible.
Controller-
Motor-
Strut-
 w/ Uppermount
DSN18-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
6.0 k 200mm		 φ65
5.0 k 250mm		 Ft:-30
Rr:-25		 Ft:-40 to -20
Rr:-35 to -15		 Ft:-91 to +12
Rr:-162 to -15		 NOT compatible with cold weather package. Shell case length: Ft=+3mm compared to standard. NOT EDFC compatible.
SKYLINE
ECR32
1991.08-1993.08 		GTS-25 TypeS RWD
2500
Controller-
Motor-
Strut-
 w/o Uppermount
DSN18-71SS2
¥110,000 (MSRP)
¥115,500 (incl TAX)		 φ65
6.0 k 200mm		 φ65
5.0 k 250mm		 Ft:-30
Rr:-25		 Ft:-40 to -20
Rr:-35 to -15		 Ft:-91 to +12
Rr:-162 to -15		 NOT compatible with cold weather package. NOT EDFC compatible.
Controller-
Motor-
Strut-
 w/ Uppermount
DSN18-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
6.0 k 200mm		 φ65
5.0 k 250mm		 Ft:-30
Rr:-25		 Ft:-40 to -20
Rr:-35 to -15		 Ft:-91 to +12
Rr:-162 to -15		 NOT compatible with cold weather package. NOT EDFC compatible.
SKYLINE
HR33
1993.08-1998.04 		GTS, GTS TypeS RWD
2000
Controller-
Motor-
Strut-
 w/ Uppermount
DSN64-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
6.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-40
Rr:-25		 Ft:-50 to -30
Rr:-35 to -15		 Ft:-76 to 0
Rr:-137 to 0		 Shell case length: Ft/Rr=-6/-3mm compared to standard. NOT EDFC compatible
SKYLINE
ER33
1993.08-1998.04 		GTS-25t TypeS RWD
2500
Controller-
Motor-
Strut-
 w/ Uppermount
DSN64-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
6.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-40
Rr:-25		 Ft:-50 to -30
Rr:-35 to -15		 Ft:-110 to +2
Rr:-176 to -3		 Shell case length: Ft=-2mm compared to standard. NOT EDFC compatible.
SKYLINE
ECR33
1993.08-1998.04 		GTS-25t TypeM RWD
2500
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN64-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
6.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-40
Rr:-25		 Ft:-50 to -30
Rr:-35 to -15		 Ft:-110 to +2
Rr:-176 to -2		 [Upon EDFC installation]
Front:
Angle of throttle wire bracket needs to be adjusted to avoid interference, if strut bar is mounted. Bonnet/hood insulator needs to be cut or removed, if it interferes.
SKYLINE
BCNR33
1995.01-1998.12 		GT-R, V-Spec AWD
2600
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN68-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
7.0 k 250mm		 Ft:-55
Rr:-30		 Ft:-65 to -45
Rr:-40 to -20		 Ft:-95 to -12
Rr:-183 to +14		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.

Rear:
FPCM (fuel pump control modulator) needs to be relocated.
SKYLINE
ER34
1998.05-2001.05 		25GT-t, 25GT-V (Super HICAS equipped car) RWD
2500
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN62-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
7.0 k 200mm		 φ65
5.0 k 250mm		 Ft:-45
Rr:-35		 Ft:-55 to -35
Rr:-45 to -25		 Ft:-111 to +3
Rr:-186 to +3		 Exclusively for electric Super HICAS model.
[Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference.
SKYLINE
BNR34
1999.01-2002.01 		Base Model AWD
2600
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN48-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-40
Rr:-30		 Ft:-50 to -30
Rr:-40 to -20		 Ft:-89 to 0
Rr:-147 to +35		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference. (except OE carbon fiber bonnet/hood)
SKYLINE
BNR34
1999.01-2002.01 		V-Spec, V-Spec ll AWD
2600
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN48-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-40
Rr:-30		 Ft:-50 to -30
Rr:-40 to -20		 Ft:-89 to 0
Rr:-147 to +35		 [Upon EDFC installation]
Front:
Bonnet/hood insulator needs to be cut or removed, to avoid interference. (except OE carbon fiber bonnet/hood)
SKYLINE
PV35
2002.02-2006.10 		350GT-8 RWD
3500
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSP34-61AS1
¥200,000 (MSRP)
¥210,000 (incl TAX)		 φ65
10.0 k 200mm		 Exclusive Spring
10.0 k		 Ft:-35
Rr:-30		 Ft:-45 to -25
Rr:-40 to -20		 Ft:-77 to +44
Rr:-65 to +17		 Includes H.A.S.
Rr: Reinforced rubber mount.
[Upon EDFC installation]
Front:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.

Rear:
Rubber cover above strut bar needs to be removed. Sponge behind rear seat might need to be cut, if it interferes.
SKYLINE COUPE
CPV35
2003.01-2007.09 		350GT, 350GT Premium RWD
3500
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSP34-61AS1
¥200,000 (MSRP)
¥210,000 (incl TAX)		 φ65
10.0 k 200mm		 Exclusive Spring
10.0 k		 Ft:-20
Rr:-15		 Ft:-30 to -10
Rr:-25 to -5		 Ft:-62 to +59
Rr:-50 to +32		 Includes H.A.S.
Rr Shock absorber is equipped with full-length adjustment feature. Shell case length: Ft=-5mm compared to standard. Spring seat position: Rr=-5mm compared to Z33. Rr: Reinforced rubber mount. Rr: Shock absorber needs to be detached from vehicle, when adjusting damping force.
[Upon EDFC installation]
Front:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.

Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Vehicle body needs to be pierced.
PULSAR
JN15
1997.09-2000.08 		VZ-R FWD
1600
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12140
StrutEDK06-K4474
 w/ Uppermount
DSN26-61SS1
¥173,000 (MSRP)
¥181,650 (incl TAX)		 φ70
7.0 k 200mm		 φ65
5.0 k 200mm		 Ft:-40
Rr:-15		 Ft:-50 to -30
Rr:-25 to -5		 Ft:-112 to +3
Rr:-41 to +49		 [Upon EDFC installation]
Rear:
Reinforcing plate on upper mount needs to be cut or removed.
FAIRLADY Z
Z32
1989.07-2000.08 		VersionS RWD
3000
Controller-
Motor-
Strut-
 w/ Uppermount
DSN22-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-15
Rr:-15		 Ft:-25 to -5
Rr:-25 to -5		 Ft:-51 to +44
Rr:-94 to +33
FAIRLADY Z
CZ32
1989.07-2000.08 		VersionS TwinTurbo RWD
3000
Controller-
Motor-
Strut-
 w/ Uppermount
DSN22-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-15
Rr:-15		 Ft:-25 to -5
Rr:-25 to -5		 Ft:-51 to +44
Rr:-94 to +33		 [Upon EDFC installation]
Front:
When installing motor, left side fuel pipe needs to be relocated.

Rear:
Motor needs to be installed parallel to bodyframe. Interior needs to be modified or removed, if it interferes with motor.
FAIRLADY Z
GZ32
1989.07-2000.08 		300ZX, VersionR, VersionS RWD
3000
Controller-
Motor-
Strut-
 w/ Uppermount
DSN22-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-15
Rr:-15		 Ft:-25 to -5
Rr:-25 to -5		 Ft:-51 to +44
Rr:-94 to +33
FAIRLADY Z
GCZ32
1989.07-2000.08 		300ZX, VersionR TwinTurbo, VersionS TwinTurbo RWD
3000
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSN22-61SS1
¥157,000 (MSRP)
¥164,850 (incl TAX)		 φ65
8.0 k 200mm		 φ65
6.0 k 250mm		 Ft:-15
Rr:-15		 Ft:-25 to -5
Rr:-25 to -5		 Ft:-51 to +44
Rr:-94 to +33		 [Upon EDFC installation]
Front:
When installing motor, left side fuel pipe needs to be relocated.

Rear:
Motor needs to be installed parallel to bodyframe. Interior needs to be modified or removed, if it interferes with motor.
FAIRLADY Z
Z33
2002.08-2008.11 		VersionS, VersionST, VersionT, Base Model RWD
3500
ControllerEDK04-K4469(Black)
 EDK04-P2756(Silver)
MotorEDK05-12120
Strut-
 w/ Uppermount
DSP34-61AS1
¥200,000 (MSRP)
¥210,000 (incl TAX)		 φ65
10.0 k 200mm		 Exclusive Spring
10.0 k		 Ft:-10
Rr:-10		 Ft:-20 to 0
Rr:-20 to 0		 Ft:-52 to +69
Rr:-45 to +37		 Includes H.A.S.
Rr: Reinforced rubber mount. Rr: Shock absorber needs to be detached from vehicle, when adjusting damping force.
[Upon EDFC installation]
Front:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.

Rear:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Strut tower needs to be pierced.
FAIRLADY Z ROADSTER
HZ33
2003.10-2008.11 		ROADSTER VersionST RWD
3500
Controller-
Motor-
Strut-
 w/ Uppermount
DSP34-61AS1
¥200,000 (MSRP)
¥210,000 (incl TAX)		 φ65
10.0 k 200mm		 Exclusive Spring
10.0 k		 Ft:-10
Rr:-5		 Ft:-20 to 0
Rr:-15 to +5		 Ft:-52 to +69
Rr:-40 to +42		 Includes H.A.S.
Rr: Reinforced rubber mount. Spring seat position: Ft/Rr=+5/+4mm compared to Z33. Rr: Shock absorber needs to be detached from vehicle, when adjusting damping force.
[Upon EDFC installation]
Front:
Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle.

Rear:
Body panel needs to be modified to secure suficient clearance. Motor needs to be installed onto shock absorber and checked for proper operation, before installing to the vehicle. Strut tower needs to be pierced.
* P/U: Pillowball Uppermount R/U: Reinforced Rubber Uppermount
*Recommended adjustment range value is the data obtained from actual testing.
*Adjusting outside recommended range might damage damper/vehicle and is nonconforming to safety standards.
*TEIN assumes NO responsibility for use outside recommended range.


Can NOT change the uppermount after the purchase,because the pillow ball uppermount for FLEX is not interchangeable with the OE uppermount.
*Some modification may be required to be EDFC compatible, depending on the vehicle models. Contact us for more details.
There might be some interference even at the standard ride height,depending on the wheel sizes / offsets,tire sizes / manufacturers, etc.
This can be checked by installing only uppermounts and shock absorbers,with casing length pre-adjusted to the preference and springs removed,and then giving the full-stroke with the jack.
For Ft,checking needs to be done with the steering wheel fully turned. (When checking,disconnect stabilizer from shock absorber / arm).
Depending on the vehicles,there might be some interference caused due to the narrow clearance between the Ft upper arm and the S/A,because of the adoption of the wide casing for superior performance and durability.
If there is any interference,sufficient clearance can be maintained by adjusting the camber angle. Refer to the Instruction Manual for more details.If the clearance is still narrow,adjusting the camber angle to the negative direction could widen it.
Warning: too large camber angle can cause partial wear to the tires and/or worsening in handling.
 
Drop us a line, ask us any questions! about Products:
Click Here